Multi-tube heat exchanger
Housing made of Noryl / polyamide
Tubes made of titanium
including paddle switch
The ZODIAC heat exchanger HEAT LINE is compatible with all types of domestic heating and convinces with its easy installation. Titanium plates and a Noryl polyamide housing offer maximum robustness.
The installation of the heat exchanger takes place near the boiler and at the exit of the filter without bypass. Horizontal installation in the piping. Primary care from above. HEAT Line heat exchangers are not suitable for installation directly in the solar circuit.
Attention: The max. Inlet temperature must not exceed 90 ° C.
Zodiac Heat Line Plus 40 heat exchanger with control
- Max. Tank volume: 120 m³
- Power with primary circuit with 90 ° C: 40 kW
- Power with primary circuit at 60 ° C: 17 kW
- Power with primary circuit at 45 ° C: 8 kW
- Max. Pressure: 2 bar
- Maximum temperature: 90 ° C
- Weight: 3 kg
- Connection primary side heating: Ø 26/34 M 1 “
- Connection of secondary side of pool: PVC Ø 63 or 50 mm